Camco Olympian Wave 3 Catalytic Safety Heater – 1600-3000 BTUs

  • By Camco
  • Model #57331


$402.99 SAVE: $80.49

Have a Question? Email

Free shipping Image

The Camco Olympian Wave 3 Catalytic Safety Heater is an ideal primary or secondary heating source to bring on the go. Use it inside your RV as a portable unit or as a portable heater outdoors! This heater can be permanently mounted on a wall or other surface in vented areas. The Camco Olympian Wave 3 heater operates on low-pressure LP gas with adjustable 1600-3000 BTUs, designed to heat an area of up to 100 square feet. The built-in, self-generating piezo starter can last for around 20,000 starts for consistent long-term use. The integral safety shut-off valve helps stop non-ignition fuel discharge. The Camco Olympian Wave 3 Catalytic Safety Heater employs convenient and easy operation, free of flames, flues, or chimneys. Devoid of fan or blower noises, this smooth operator works in silence. The Olympian catalytic heating element features a high porosity spongy texture, which allows for perfect transport of the oxygen needed for combustion. The catalytic heating element is evenly impregnated with platinum, guaranteeing optimal oxidation of gas and elimination of the mix of dangerous gas emissions. Catalytic heating is over 96% efficient, resulting in efficient, low-cost heat, as opposed to flame-type heaters, which waste up to 45% of all heat produced. The heated area depends greatly on the insulation R-factor and outside temperature. All “heated area” specifications were based on an outside temperature of 35°F and R17 interior insulation. If camping in cooler temperatures, or if the RV is not well insulated, a larger heater should be installed. State and local codes vary and may regulate the installation of this heater in recreational vehicles. Get your Camco Olympian Wave 3 Catalytic Safety Heater for safe, effective heating and comfort anywhere you travel!



  • Olympian Wave 3 Catalytic Safety Heater
  • Fuel Type: Low Pressure LP Gas
  • Gas Connection: 3/8” SAE Flare
  • Heats up to 100 sq. ft.
  • Output: Adjustable from 1600 to 3000 BTUs
  • Fuel Consumption at Max Output: 1/8 lb. per Hour
  • Dimensions: 10.25” W x 3.5” D x 11.75”H
  • Weight: 6 lbs.
  • Self-Generating Piezo Spark Ignition
  • Safety Shut-Off Valve Helps Stop Non-Ignition Fuel Discharge
  • Conveniently Has No Flame, Flue, or Chimney for Easy Use
  • Silent Operation, No Fan or Blower Noise
  • For Use in Vented Areas Only
  • Can Be Wall Mounted or Used as a Portable Unit
  • Minimum Clearance: 30” (Front) / 4” (Sides) / 0” (Back) / 18” (Top) / 4” (Bottom)
  • Leg Stands Not Included (Item # 57701, Sold Separately)