DEWALT DXH185KT Forced Air Diesel/Kerosene Heater – 185,000 BTU

  • Model #F340685


Have a Question? Email

Free shipping Image

The thermostatically controlled DEWALT DXH185KT Forced Air Heater burns at 185,000 BTU per hour and can be used with kerosene, diesel, fuel oil, or JP-8 fuels. With a 13.8-gallon tank, you can get 9.5-hours of run time and the ability to heat up to approximately 4,000 square-feet of space (based on average insulation, ceiling height, and desired temperature rise). Equipped with a thermostat, the heating element cycles on and off to maintain the set temperature. The continuous electronic ignition is always present as a source of ignition for unburned fuel, reducing the ability for fuels to pool and collect in a dangerous manner. The recessed controls are designed to reduce the risk of damage on the jobsite. The rugged two-piece barrel makes cleaning and maintenance easier and safer.


  • DEWALT Forced Air Heater
  • Model # DXH185KT
  • Heat Type: Forced Air
  • Application: Jobsite Heating (Proper Ventilation Required)
  • Fuel Type: Kerosene, Jet A Fuel (JP8), #1 Diesel, #2 Diesel, #1 Fuel Oil, #2 Fuel Oil
  • Fuel Tank Size: 13.8 Gallons
  • CFM Output: 400
  • BTU Output: 185,000
  • Heating Area: 4,000 sq. ft.
  • Approximate Run Time: 9.5 Hours
  • Continuous Spark Ignition (Requires 115V AC Outlet)
  • Cold Weather Starting Capability
  • High Temperature Safety Shut-Off Switch
  • Photo CAD Cell Flame Sensor
  • Thermostat: 25°F – 95°F
  • Fuel Gauge
  • Recessed Controls
  • Split Barrel Design
  • 10 in. Foam Filled Flat-Free Tires
  • Weight: 69 lbs.
  • CSA Certified

Alternate Items

Alternate Items